Enhanced Adhesion
Developed for selected difficult-to-adhere plastics.
UV & LED Curing Ink Systems
H1013UV
H1013UV High-Adhesion UV Screen & Pad Printing Ink
A single-component UV-curing screen and pad printing ink for selected plastic substrates requiring enhanced adhesion, abrasion resistance and durability.
Enhanced AdhesionUV Screen & Pad PrintingAbrasion & Scratch ResistanceAlcohol & Chemical Resistance
- Printing Method
- Screen Printing & Pad Printing
- Recommended Substrates
- ABS · PC · PVC · PMMA · Selected PET · UV-Coated Surfaces · Compatible Plastic Materials
Printing MethodScreen Printing & Pad Printing
Ink TypeSingle-component UV-curing ink
Curing MethodUV mercury lamp curing
UV EnergyApproximately 600–1,200 mJ/cm²
Recommended SubstratesABS · PC · PVC · PMMA · Selected PET · UV-Coated Surfaces
Main ApplicationSelected difficult-to-adhere plastic parts
KEY PERFORMANCE
Performance built around the printed finish
UV Screen & Pad Printing
Supports both confirmed printing processes.
Abrasion & Scratch Resistance
Durable after complete UV curing.
Alcohol & Chemical Resistance
Good resistance after complete curing.
RECOMMENDED SUBSTRATES
Confirmed compatible materials
Performance depends on substrate, surface treatment, printing process and drying or curing conditions. Substrate testing is required before production.
TECHNICAL INFORMATION
Technical Information
Key reference data for product selection and UV-curing evaluation.
- Product Type
- Single-component, high-adhesion UV-curing screen and pad printing ink
- Printing Method
- Screen Printing & Pad Printing
- Recommended Substrates
- ABS, PC, PVC, PMMA, selected PET, UV-coated surfaces and other compatible plastic materials
- Air Drying
- Does not surface dry; protect from ambient UV light
- Screen Mesh
- 100–150T for screen printing applications
- Curing Method
- UV curing with a suitable UV mercury lamp system
- Recommended UV Energy
- Approximately 600–1,200 mJ/cm², depending on color, ink-film thickness, equipment and production conditions
- Light Colors / Clear Coatings
- Approximately 600 mJ/cm² may be sufficient
- Dark Colors
- Approximately 800–1,200 mJ/cm² may be required
- Full Cure
- After UV exposure · Reference dose: 800–1,200 mJ/cm²
- Alcohol Resistance
- No visible change · 500 g load; 2,000 double rubs with an alcohol-saturated cotton pad
- Adhesion
- 100/100 squares retained · 1 mm × 1 mm, 100-grid cross-cut; 3M tape peel
- Abrasion Resistance
- No substrate exposure · 500 g load; 3,000 double rubs with an abrasive eraser
- Gasoline Resistance
- No visible change · 500 g load; 500 double rubs with a gasoline-saturated cotton pad
View Additional Test Data
- Acid Resistance
- No visible change · 5% HCl immersion for 24 h
- Alkali Resistance
- No visible change · 5% NaOH immersion for 24 h
- Salt-Water Resistance
- No visible change · 5% NaCl immersion for 24 h
- Water Resistance
- No visible change · Tap-water immersion at 20°C for 96 h
Test results are for reference only. Actual performance depends on substrate, surface treatment, printing process, UV energy and curing conditions.
Technical notes- Protect uncured ink from ambient UV light.
- Conduct a production trial on the actual substrate before mass printing.
- Validate curing according to lamp type, UV intensity, conveyor speed, color, opacity and ink-film thickness.
- Shelf life: 12 months from manufacture in unopened original packaging; re-test expired material.
STANDARD COLORS & SPECIAL EFFECTS
Catalog Color Range
Standard, metallic, fluorescent and transparent colors shown in the catalog are available as reference options. Final appearance must be confirmed on the actual substrate.
PACKAGING OPTIONS
Packaging options
COMPLIANCE & DOCUMENTATION
Product documentation scope
The available documentation scope for this product includes the items shown below. Please identify the required color and destination market when requesting the applicable report.
- Standard colors can be supplied to meet applicable RoHS, REACH, PAHs and EN 71-3 requirements.
- Halogen-related and other regulatory claims must be confirmed against the current report for the selected color and target market.
TECHNICAL & CUSTOMIZATION SUPPORT
Support around the substrate, color and printing process
Match the required appearance using the confirmed substrate and reference.
Review adhesion, drying and resistance requirements together.
Evaluate the actual substrate, treatment and printing conditions.
Review leveling, edge definition, adhesion and drying issues.
WHY CHOOSE HONGSHENG
Focused support for industrial printing projects
Customized formulationSubstrate testing supportFlexible packaging supportConsistent product performance
Learn More About Hongsheng →