Excellent Flexibility
Designed for TPU and TPE substrates.
Flexible & Specialty Material Ink Series
H102
H102 TPU/TPE Ink
A single-component, low-odor aromatic solvent-based ink for flexible TPU and TPE substrates, providing strong adhesion, flexibility and crack resistance.
Excellent FlexibilityStrong AdhesionCrack ResistanceStretch Resistance
- Printing Method
- Screen Printing & Pad Printing
- Recommended Substrates
- TPU · TPE · Flexible Elastomeric Plastics
Printing MethodScreen Printing & Pad Printing
Ink TypeLow-odor aromatic solvent-based ink
Component TypeSingle-component
Drying MethodAir drying or low-temperature oven drying
Recommended SubstratesTPU · TPE · Flexible elastomeric plastics
Main ApplicationFlexible plastic products
KEY PERFORMANCE
Performance built around the printed finish
Strong Adhesion
Reliable adhesion on compatible soft plastics.
Crack Resistance
Maintains print integrity after bending and deformation.
Stretch Resistance
No cracking or peeling under the stated stretch test.
RECOMMENDED SUBSTRATES
Confirmed compatible materials
Performance depends on substrate, surface treatment, printing process and drying or curing conditions. Substrate testing is required before production.
TECHNICAL INFORMATION
Technical Information
Key reference data for product selection and printing evaluation.
- Product Type
- Low-odor aromatic solvent-based TPU/TPE ink
- Printing Method
- Screen Printing & Pad Printing
- Recommended Substrates
- TPU, TPE and other flexible elastomeric plastics
- Component Type
- Single-component
- Surface Drying
- Hot air: 40–60°C (Recommended: 50°C)
- Full Drying
- Air dry for 24 hours, or oven cure at 80°C for 30 minutes
- Screen Mesh
- 100–150T
- Dry-Film Gloss
- ≥ 65 GU · 60° gloss meter
- Adhesion
- 100/100 squares retained · 1 mm × 1 mm, 100-grid cross-cut; 3M tape peel
- Alcohol Resistance
- No visible change · 500 g load; 100 double rubs with an alcohol-saturated cotton pad
View Additional Test Data
- Ink Fineness
- ≤ 12 μm · Grind gauge
- Flexibility
- No cracking or peeling · Repeated bending test
- Stretch Resistance
- No cracking or peeling · Stretch deformation test
- Abrasion Resistance
- No ink removal · Manual rubbing test
- Water Resistance
- No visible change · Tap-water immersion at 20°C for 96 h
- Heat Resistance
- No visible change · 80°C for 12 h
Test results are for reference only. Actual performance depends on substrate, surface treatment, printing process and drying or curing conditions.
Technical notes- Conduct a production trial on the actual substrate before mass printing.
- Remove dust, oil, release agents and other contaminants before printing.
- Drying and resistance may vary with substrate grade, ink-film thickness, temperature and ventilation.
PACKAGING OPTIONS
Packaging options
COMPLIANCE & DOCUMENTATION
Product documentation scope
The available documentation scope for this product includes the items shown below. Please identify the required color and destination market when requesting the applicable report.
- Product- and color-specific compliance documentation is available upon request.
- Confirm the required regulation, test method, color and target market before ordering.
TECHNICAL & CUSTOMIZATION SUPPORT
Support around the substrate, color and printing process
Match the required appearance using the confirmed substrate and reference.
Review adhesion, drying and resistance requirements together.
Evaluate the actual substrate, treatment and printing conditions.
Review leveling, edge definition, adhesion and drying issues.
WHY CHOOSE HONGSHENG
Focused support for industrial printing projects
Customized formulationSubstrate testing supportFlexible packaging supportConsistent product performance
Learn More About Hongsheng →