Excellent Adhesion
Excellent adhesion on PET and flexible plastic substrates.
Plastic Substrate Ink Series
H662
H662 PET Flexible & Anti-Crack Ink
A single-component, low-odor aromatic solvent-based ink developed for flexible and difficult-to-adhere plastic substrates, providing excellent adhesion, flexibility and crack resistance.
Excellent AdhesionFlexible & Crack ResistantAlcohol & Gasoline ResistanceHeat Resistance up to 120°C
- Printing Method
- Screen Printing & Pad Printing
- Recommended Substrates
- PET Films · PC · Vacuum-Formed Plastics · IMD Components · Selected Flexible Plastics
Printing MethodScreen & Pad Printing
Ink TypeLow-odor aromatic solvent-based ink
Component TypeSingle-component
Drying Method24 h room-temperature air dry or 80°C oven cure for 30 min
Recommended SubstratesPET films · PC · Vacuum-formed plastics · IMD components · Selected flexible plastics
Main ApplicationFlexible and anti-crack plastic decoration
KEY PERFORMANCE
Performance built around the printed finish
Flexible & Crack Resistant
Outstanding flexibility with crack resistance.
Alcohol & Gasoline Resistance
Excellent resistance to alcohol and gasoline.
Heat Resistance up to 120°C
Heat resistance up to 120°C as stated in the latest TDS.
RECOMMENDED SUBSTRATES
Confirmed compatible materials
Performance depends on substrate, surface treatment, printing process and drying or curing conditions. Substrate testing is required before production.
TECHNICAL INFORMATION
Technical Information
Key reference data for product selection and printing evaluation.
- Product Type
- Single-component, low-odor aromatic solvent-based ink
- Printing Method
- Screen printing and pad printing
- Recommended Substrates
- PET films, PC, vacuum-formed plastics, IMD components and selected flexible plastic substrates
- Component Type
- Single-component
- Surface Drying
- Hot air: 40–60°C (Recommended: 50°C)
- Full Drying
- Air dry for 24 hours, or oven cure at 80°C for 30 minutes
- Screen Mesh
- 100–150T
- Dry-Film Gloss
- ≥ 65 GU · 60° gloss meter
- Adhesion
- 100/100 squares retained · 1 mm × 1 mm, 100-grid cross-cut; 3M tape peel
- Alcohol Resistance
- No visible change · 500 g load; 500 double rubs with an alcohol-saturated cotton pad
View Additional Test Data
- Ink Fineness
- ≤ 12 μm · Grind gauge
- Acid Resistance
- No visible change · 5% HCl immersion for 24 h
- Alkali Resistance
- No visible change · 5% NaOH immersion for 24 h
- Salt-Water Resistance
- No visible change · 5% NaCl immersion for 24 h
- Water Resistance
- No visible change · Tap-water immersion at 20°C for 96 h
- Heat Resistance
- No visible change · 80°C for 12 h
- Abrasion Resistance
- No substrate exposure · 500 g load; 500 double rubs with an abrasive eraser
Test results are for reference only. Actual performance depends on substrate, surface treatment, printing process and drying conditions.
Technical notes- Remove dust, oil, mold-release residue and other contaminants before printing.
- Conduct a production trial before mass printing.
- Drying and performance vary with substrate, surface treatment, film thickness, temperature and ventilation.
- Shelf life: 12 months from manufacture in unopened original packaging; re-test expired material.
STANDARD COLORS & SPECIAL EFFECTS
Catalog Color Range
Standard, metallic, fluorescent and transparent colors shown in the catalog are available as reference options. Final appearance must be confirmed on the actual substrate.
PACKAGING OPTIONS
Packaging options
COMPLIANCE & DOCUMENTATION
Product documentation scope
The available documentation scope for this product includes the items shown below. Please identify the required color and destination market when requesting the applicable report.
- Applicable RoHS requirements for standard colors
- Applicable REACH requirements for standard colors
- Applicable PAHs requirements for standard colors
- Applicable EN 71-3 requirements for standard colors
TECHNICAL & CUSTOMIZATION SUPPORT
Support around the substrate, color and printing process
Match the required appearance using the confirmed substrate and reference.
Review adhesion, drying and resistance requirements together.
Evaluate the actual substrate, treatment and printing conditions.
Review leveling, edge definition, adhesion and drying issues.
WHY CHOOSE HONGSHENG
Focused support for industrial printing projects
Customized formulationSubstrate testing supportFlexible packaging supportConsistent product performance
Learn More About Hongsheng →